• Using a fine blade from approximately 40 to 50 teeth with the inch for a manual saw (see case of tools) or approximately 20 teeth with the inch for a power saw (Scroll saw), delicately cut out each piece of wood natural. The wood of our Kits, a thickness of 3mm. (1/8 inches) cuts out easily, without effort and breaking since it acts of plywood.
• Note the reference number to the endorsement of each part for an easy location on the bottom.
• Slightly sand each part according to your tastes and waitings.

OPTION Add color to your project? Assemble your Kit while adding to it of the dyeing color of your choice, BEFORE sticking your parts. An option which enables you to personalize your kit to the maximum.

For more information, read on stains.

• Before sticking your parts, locate the place on the bottom and test the piece if it is adjusted well in its place. Adjust with the need. Use paste in small quantity, to hold the piece a few moments and here.
• Make a last very fine sanding to soften. Remove the traces of dust with a vacuum cleaner.
• Apply the product of completion of your choice. The completion will raise the beauty of wood and will protect it for several years.
• Hang your Kit with the wall and admire it.

You will need :

- Kit of Marquetry to the choice ( see our store )
- Fine blades ( manual or electric saw )
- Dyeing color in option ( read on stains )
- White Glue
- Sandpaper, variety of grain according to practice of sanding
- Products of completion to the choice
- So desired framing ( see framing )

Good do-it-yourself, and in the event of questions, we are there to help you!